BORK B 780, Инструкция по эксплуатации

Страница: 6 / 14

8 9
ON/OFF
• Place the ingredients in order that the level does not exceed the
MAX mark.
• Close the lid tight.
• Make sure that the speed control is in OFF position.
• Plug the blender in.
• The ingredients of smaller size can be fed during the blender
operation at that remove the measuring cup from the feeding
opening by slightly turning it over.
The root crops (carrots, celery root etc.) are to be fed through
the feeding opening in the lid only when the blender is operated
to avoid the blades blockage.
Never turn the empty blender ON.
• Set the required speed or PULSE mode.
Start blending at low speed then the speed can be gradually
increased.
• After use turn the speed control OFF and unplug the blender.
Switch the appliance off before taking the lid off. Press the lid
against the jar during operation to avoid accidental opening due
to overpressure.
Clean the blender immediately after use.
• For easy cleaning fill the jar with water and mild detergent and
turn the blender on for a few seconds. Repeat with clean water.
• Switch the appliance off and unplug.
• Take the blender’s jar off the base.
• To take the blades set off turn the bottom ring counterclockwise
and carefully remove the blades set.
• First take the blades set off, then the lid.
The blender’s blades are very sharp and require extremely careful
handling.
• Thoroughly wash the blades, the jar and the lid with flow water
and some detergent. Dry them.
Do not use steel wool, chemicals, abrasive cleansers and agents
containing sulfanilamide or citric acid for blender cleaning.
Do not wash the blades set in dishwashers.
The jar, the lid and the measurement cup are suitable for washing
in dishwashers.
• Wipe the exterior of the blender’s casing with a wet napkin
soaked with soapy solution and then with a soft dry napkin.
Prevent the base from contact with water or other liquids.
• Install the blades set into the jar base but put the silicone ring
on first.
• Turn the blades set clockwise until locking to securely fix the
blades set in the jar.