620 16
th
Street #300, Denver Colorado 80202 720-961-4056
www.borgdisplays.com
BORG DISPLAYS
1. Click on “Start”…”Run” and type “regedit” then click OK button.
2. The computer name is stored in
\HEKY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ActiveComputerName,
change the value (REG_SZ) of “ComputerNmae” to the new name that you want.
3. Locate to \HEKY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName
and change the “ComputerName” item to the same name.
4. Close Registry Edit and Reboot.
Or seek a tool
from SysInternals called “New_Sid”.
Motherboard CMOS:
To clear/reset the CMOS setting and restore them to default, you can find the JREC
jumper on motherboard and clear the BIOS settings.
Firmware updates:
To restore image onto Pro-8, Pro8a, Pro15a, you have to boot this machine under a pure
DOS environment, the fastest way is to prepare a clean USB thumbnail disk which is SMALLER than 4GB, make it
bootable
and copy all necessary files to this USB disk (you can download a USB boot tool from
http://www.emink.com/files/usbtool.rar
)
Downloading plugins:
Some DVRs, devices, etc will be blocked from accepting a download. XPe prohibits
this by default for security reasons but can be overridden like a PC by going to Control Panel > IE Options >
Security > Place the URL and hit Add, then LOW for the security setting and try again.
