GB
Fault Diagnosis Guide
Fault
Possible Cause
Suggested Action
Not Cooling
The compressor is not running
Check the power is switched
on
The power is on but not
cooling
The thermostat is set too high
Reduce the thermostat
temperature setting
Water leakage
The pipes or connections are
leaking
Switch off power turn off water
and call your service engineer
Slow water flow
The filter is blocked
Change the filter
No water dispenses from the
taps
Water inlet valve(s) closed
or other blockage
Open and/or reset the water
inlet valve(s) and/or check
water supply pipe
Drainage waste blocked
Debris has blocked up the
waste system
Clear the obstruction
In the event of any other breakdown, please call your service engineer.
Electrical Diagram
Cold Thermostat
Fuse
Compressor
