BORETTI MLWC82, Руководство пользователя

Страница: 9 / 98

9
2. Installation
2.1 Before use
Before connecting the wine cabinet to the power source, let it stand upright for
at least 6 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Read the instructions supplied with the appliance – failure to install or use of
the appliance in accordance with the instructions may invalidate any warranty.
Boretti does not accept any liability for damage caused through improper use,
or incorrect installation. Do not install this appliance if it has been damaged
during transportation. This includes the plug and supply cord.
Please keep these instructions in a safe place for future reference.
2.2 Installation of the wine cabinet
1. Place you wine cabinet on a flat floor that is strong enough to support
it when it is fully loaded.
2. This appliance uses flammable refrigerant. Never damage the cooling
pipework during transportation and installation.
3. Locate the wine cabinet away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating
and heat sources may increase electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to perform properly.
4. Avoid locating the unit in moist areas.
5. Put the plug of the wine cabinet into an appropriate socket. Should
the plug require changing, get help from a qualifed service technician.
6. Ensure the product is correctly ventilated (See section 1.3).
7. Plug the wine cabinet into an exclusive, properly installed-grounded wall
outlet. Do not under any circumstances cut or remove the third (ground) pin
from the plug. Any questions concerning power and/or grounding should
be directed toward a certified electrician or Customer Service Boretti.
EN
Boretti Wine Cabinets / User guide - Installation advice