BORETTI CFBG902AN, Инструкция по монтажу и эксплуатации

Страница: 209 / 232

209
Do not store flammable material in the oven or in the storage compartment.
STORAGE COMPARTMENT
The storage compartment is accessible through the pivoting panel (fig. 7.14a).
A
B
A
C
WRONG
CORRECT
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
• Let the oven cavity and the heating
elements to cool down.
• Switch off the electrical supply.
• Remove the protective cover “ A
” (fig.
7.14b).
• Replace the halogen lamp “ C ”
with a new one suitable for high
temperatures (300°C) having the
following specifications:
230V, 50 Hz
and same power (check watt power
as stamped in the lamp itself) of the
replaced lamp.
IMPORTANT WARNING: Never
replace the bulb with bare hands;
contamination from your fingers can
cause premature failure. Always use a
clean cloth or gloves.
•
Refit the protective cover.
Note: Oven lamp replacement is not
covered by your guarantee.
Fig. 7.14b
Fig. 7.14a