Free match series
6
3 Preparation before Installation
3.1 Standard parts
Please use the following standard parts supplied by us.
Table 4
Pars of Outdoor Unit
Number
name
picture
Quantity
Remark
1
Owner's manual
1
2
Tube connector
subassy
30K:8
36K:8
42K:9
3.2
Selecting installation site
1) Install the unit at a place where is adequate to withstand the weight of the unit and make sure the unit would not
shake or fall off.
2)
Never expose the unit under direct sunshine and rainfall. Install the unit at a place where is against dust,
typhoon and earthquake.
3)
Try to keep the unit away from combustible, inflammable and corrosive gas or exhaust gas.
4)
Leave some space for heat exchanging and servicing so as to guarantee unit normal operation.
5)
Keep the indoor and outdoor units close to each other as much units close to each other as much the
pipe length and bends.
6)
Never allow children to approach to the unit and take measures to prevent children touching the unit.
When the outdoor unit is totally surrounded by walls, the installation space of the unit should be as required in
Fig.3.
19 2/3
39 3/8
78 3/4
19 2/3
19
2/
3
19
2/
3
78 3/4
unit:inch
Fig 3
Split Air Conditioner
Thank you for choosing our product.
If you have lost the Owner’s Manual, please contact the local agent or visit
For proper operation, please read and keep this manual carefully.
www.borealintl.com or sent email to [email protected] for electronic version.
