Boreal ACDX-45 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 37

background image

37

2005 Boreal Geothermal Inc.

www.boreal-geothermal.com

LIMITED WARRANTY

MANUFACTURER warrants that the heat pumps manufactured by it

shall be free from defects in materials and workmanship for a period of (1) ONE
YEAR after the date of installation or for a period of (1) ONE YEAR AND (60)
SIXTY DAYS after the date of shipment, whichever occurs first. In addition

MANUFACTURER warrants that the compressor shall be free of defects in
materials and workmanship for an additional period of (48) FORTY-EIGHT
MONTHS from said date.

MANUFACTURER shall, at it's option repair or replace any part or parts

covered by this warranty which shall be returned to BOREAL GEOTHERMAL
INC., transportation charges prepaid, which, upon examination proves to be
defective in materials or workmanship. Replacement or repaired parts and

components are warranted only for the remaining portion of the original war-
ranty period.

This warranty is subject to the following conditions:

1. The BOREAL® heat pump must be properly installed and maintained in

accordance with Boreal Geothermal Inc.'s installation and maintenance
instruct ions.

2. The installer must complete the “

Installation Data Sheet

”, have it

endorsed by the owner and return it to MANUFACTURER within 21

days after the installation of the unit.

3. It is the responsibility of the building or general contractor to supply

temporary heat to the structure prior to occupancy. These heat pumps

are designed to provide heat only to the completely finished and

insulated structure. Start-up of the unit shall not be scheduled prior to
completion of construction and final duct installation for validation of
this warranty.

If the heat pump, manufactured by MANUFACTURER fails to conform to

this warranty, MANUFACTURER 's sole and exclusive liability shall be, at it's

option, to repair or replace any part or component which is returned by the
customer during the applicable warranty period set forth above, provided that
(1) MANUFACTURER is promptly notified in writing upon discovery by the
customer that such part or component fails to conform to this warranty. (2)
The customer returns such part or component to BOREAL GEOTHERMAL

INC., transportation charges prepaid, within (30) thirty days of failure, and (3)
Manufacturer's examination of such component shall disclose to it's satisfac-
tion that such part or component fails to meet this warranty and the alleged

defects were not caused by accident, misuse, neglect, alteration, improper in-
stallation, repair or improper testing.

«
...
35
36
37

Содержание ACDX-45






































Отзывы:

Нет отзывов

Похожие инструкции для ACDX-45

Бренд: Danfoss Страницы: 8

Бренд: Danner Страницы: 2

Бренд: Parker Страницы: 12

Бренд: ubbink Страницы: 29

Бренд: YANGTECH Страницы: 23

VRV IV Q+ Series

Бренд: Daikin Страницы: 48

PROFESSIONAL 5965-01

Бренд: Simer Страницы: 19

Бренд: Annovi Reverberi Страницы: 18

COBRA DS 0600 E

Бренд: BUSCH Страницы: 24

Бренд: Barracuda PUMPS Страницы: 4

Бренд: L.B. White Страницы: 20

Бренд: Baker Hughes Страницы: 78

Бренд: Oilon Страницы: 68

DynaDrive DD60-10

Бренд: Davey Страницы: 32

Бренд: Zibro Страницы: 24

Бренд: salmson Страницы: 28

DULCO Trans 40/1000 PVDF

Бренд: ProMinent Страницы: 52

Бренд: Asada Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды