bora PKG11, Инструкции по эксплуатации и монтажу, Страница: 33 / 44

EN
33
Operation
www.bora.com
INFO If the cooktop is switched off after the cooking
session (the knob ring is turned to the 12 o’clock
position), the childproofing feature will be
automatically reactivated.
6.3.5 Using the timer functions
INFO You can set a time range of between 1 and
120 minutes for the timer functions.
Setting the time
X X
Turn the knob ring to the 11 o’clock position.
Q Q
t
appears on the control knob display.
X X
Press the touch surface for one second.
Q Q
A beep can be heard and the control knob display
shows
0 0 0
.
X X
Within 3 seconds, twist the knob ring to set the timer
time.
Q Q
Turning clockwise increases the time (starting at
0 minutes), while turning anticlockwise reduces the
time (starting at 120 minutes).
Q Q
In the range from 0 to 20 minutes, the time reduces/
increases in both directions by one minute at a time,
while the increments are 5 minutes for the rest of the
range.
Q Q
If no time is set within 3 seconds, the timer is
deactivated and the control knob display switches
to
t
.
X X
Press the touch-surface within 3 seconds to confirm
the time set.
Q Q
A beep sounds and the set value starts to flash on the
control knob display.
Activating the timer function
X X
Once you have confirmed the time set, you have 3
seconds to turn the knob ring to the desired power
level.
Q Q
This activates the timer function and the time starts to
count down.
Q Q
The display switches (for 3 seconds each) between the
power level and the remaining time (accurate to the
minute for more than 2 minutes and accurate to the
second for under 2 minutes).
Q Q
Once the remaining time is less than 2 minutes, only
the time is displayed.
Q Q
At the end of the time, the cooking zone is switched
off, a beep sounds for 2 minutes and the control knob
display flashes
0 0 0
.
Q Q
The flashing and the beeping can be stopped by
pressing the touch surface or turning the knob ring to
the 12 o’clock position.
Switching the timer off early:
X X
Turn the knob ring to the 12 o’clock position.
Q Q
The control knob display changes to
0
, a beep sounds
Increasing the heat retention level
X X
Press the touch surface on the control knob a second
time for 1 second to activate heat retention level 2 (
:
).
X X
Press the touch surface on the control knob a third
time for 1 second to activate heat retention level 3 (
*
).
Q Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Reducing the heat retention level
Q Q
After setting heat retention level 3, pressing the touch
surface (1 second) again reduces the level by 1.
Q Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Switching off the heat retention level
The heat retention level activated switches off if you
X X
select another power level.
X X
switch off the cooking zone.
6.3.4 Childproofing feature
INFO The childproofing feature can only be activated
or permanently deactivated if the knob ring is in
the 12 o’clock position and there are no active
functions.
Activating the childproofing feature
X X
Press the touch surface of one of the control knobs for
5 seconds.
Q Q
An acoustic signal can be heard and the display on
the control knob switches to
L
. After 10 seconds
the display goes out and the childproofing feature is
activated.
Permanently deactivating the childproofing
feature
X X
Press the touch surface of one of the control knobs for
5 seconds.
Q Q
An acoustic signal can be heard and the display on
the control knob switches to
L
. After 10 seconds
the display goes out and the childproofing feature is
permanently deactivated.
Deactivating the childproofing feature for a
cooking session
X X
Turn the knob ring from the 12 o’clock position to a
power level.
Q Q L
appears in the control knob display.
X X
Press the touch surface of one of the control knobs for
5 seconds.
Q Q
A beep can be heard and the control knob display
shows the power level selected.
Q Q
The childproofing feature is only deactivated for this
cooking session and you can set the desired power
level.