bora PKG11, Инструкции по эксплуатации и монтажу, Страница: 17 / 44

EN
17
Installation
www.bora.com
5 Installation
X X
Observe all safety and warning information (see the
Safety chapter).
X X
Follow the enclosed manufacturer’s information.
X X
Please note the local regulations and connection
requirements applicable to gas cooktops.
X X
Before connecting the appliance, check that the
appliance settings comply with local connection
requirements (gas type and pressure).
INFO Ensure sufficient ventilation.
INFO The cooktop must not be installed above cooling
devices, dishwashers, stoves, ovens, washing
machines or driers.
INFO The contact surface of the worktops and wall
sealing strips must be made of a heat-resistant
material (up to approx. 100 °C).
INFO Worktop cut-outs must be moisture-sealed using
suitable means or, where necessary, fitted with a
thermal insulator.
INFO Control knobs must only be connected to the
cooktop extractor connections provided.
INFO Taking into account the applicable valid
regulations, the cooktop must be connected to
the gas line with an upstream stopcock.
INFO The gas supply pipe can be connected after the
gas cooktop has been installed.
INFO The hose connection must be laid in such a way
that it is not subject to deformation, buckling or
abrasion.
INFO The stopcock and gas supply pipe connections
must be accessible.
INFO It must be possible to inspect the entire length of
the hose line once installed.
INFO Only compatible connection pieces are to be used
for the hose line.
INFO The gas connection hose line must not come into
contact with smoke or the flue outlet of an oven.
INFO The hose line must not come into contact with hot
surfaces on the cooktop or other devices.
INFO The gas hose must be inspected every 5 years
and replaced if necessary.
5.1 Checking the delivery
Name Quantity
Cooktop 1
Control knob 2
Operating and installation instructions 1
Cooktop mounting screws 4
Height adjustment plate set 1
Cooktop mounting straps 4
Control knob cable 2
Automatic extraction system cable 1
Glass ceramic cleaning instructions 1
Glass ceramic scraper 1
Cast-iron grate 2
Nozzle set G20/20 mbar natural gas PKGDS2020 1
Flexible gas connection hose, length 500 mm,
1/2” external thread
1
Cylindrical/conical transition piece 1
Seal 1
Tab. 5.1 Scope of delivery
X X
Check the delivery for damage and make sure it is
complete.
X X
If there are any missing or damaged parts, please
notify BORA After Sales Service immediately.
X X
Do not under any circumstances install parts which are
damaged.
X X
Dispose of transport packaging in the proper manner
(see the Decommissioning and Disposal chapter).
5.2 Tools and aids
The following tools are required for the correct installation
of the cooktop:
Q Q
Pencil
Q Q
Measuring tool
Q Q
Drill or cordless drill with 50 mm Forstner bit
Q Q
Screwdriver/Torx screwdriver 20
Q Q
Silicone sealant for sealing cutting surfaces