Press the menu button ,set the water ,concen-
tration as you want and the temperature to
40°C - 70°C
Turn on the switch, wait until the milk indicator
light is on, indicating that the heating is
complete, you can use
14
13
Adjust the tray to the right height
White light is on
4
5
Clean the funnel(clean every day)
Before clean the boiler, in order to prevent access to the inside of the machine while pouring
out boiler water, please drain the water in the boiler as follows: In the normal mode, remove
the water tank. Put the bottle on the tray, press "+ -"these 2 buttons. At the same time, the
machine will automatically come out the water, and press any key will stop pumping.
When the sensor can not sense the bottle, you can turn off the sensor as follows: you can
press "MENU START +" these 3 buttons at the same time, the machine will have a long
sound "di--" ,at the same time the white light is on,then you can start brewing milk powder.
Clean the Powder box
Attention:
place the bottle on the tray. When the milking machine senses the bottle, the body will light
up in white. Then the bottle warning light of the display goes out, indicating that it is
correctly placed.
Cleaning and Care
1
2
Please remove the funnel for
cleaning after it is no longer
used within 2 hours.
Please remove and clean the powder
box every time after using all the
powder in the box
Note: When removing the powder box,
please press the fuselage with both
hands and pull it out.
