4
®
Step 1: Secure the seat back using attached hook & loop fasteners.
Step 2: Secure the padded armrests with 6 SCREWS (15) and ALLEN WRENCH (17). Please note the small numbers next to the
screws (Fig. 1) to indicate the order in which they should be installed to ensure best fit.
Step 3: Insert the HEADREST (3) into the slot on the back of the chair and lock into place by ins turning the HEADREST
KNOB (16) clockwise.
Step 4: Insert POWER ADAPTOR (2) into the POWER RECEPTACLE (A).
Step 5: Plug POWER ADAPTOR (2) into power outlet.
*
Step 6: Connect audio cords using one of the following methods and turn Boomchair® on with the controller.
ASSEMBLY INSTRUCTIONS
*CAUTION: Use only provided adaptor! Different voltage may cause permanent damage.
STEP 1
STEP 3
STEP 2
1
2
3
Fig. 1
Fig. 2
