DO’S
and
DON’TS
Intelliswitch comes with 2 completely independent solid state
digital switches and is designed to be used with 2 batteries of the
same chemistry and capacity for receiver and servo switching. A
matched pair of batteries will give best performance.
DO NOT use Intelliswitch with batteries of different voltages or
different battery chemistries unless you are an advanced user
that is aware of the consequences. Mixing of different battery
voltages or chemistry types when using Intelliswitch may cause
the battery with the highest voltage to be consumed first. This
may be desirable if you are experienced with modeling or Robot-
ics, however you do this at your own risk.
It is recommended that Intelliswitch is used in conjunction with
a
Booma RC Dual Battery
isolator for battery fail-safe single
receiver usage.
NEVER USE INTELLISWITCH (OR ANY DUAL SWITCH) TO SWITCH
AN IGNITION SYSTEM AND RECEIVER SYSTEM AT THE SAME
TIME. INTERFERENCE FROM THE IGNITION SYSTEM MAY CAUSE
LOSS OF CONTROL OF YOUR MODEL.
To switch your models gas ignition system we recommend the
Booma RC Ignition Switch, designed to isolate any ignition inter
-
ference from your receiver system.
WARNING
Please observe correct connection polarity i.e.
RED is battery
positive
and
BLACK is battery negative
. Incorrect polarity will
damage the main circuit output capacitor(s) voiding warranty.
3
