12
13
Using Tubular (sew-up) Wheels
Regularly examine your tubular tires and keep them in good condition. Examine the casing
and tread of the tire for cuts or tears to the tubular casing. Make sure the base tape does not
have cuts or tears. Most important, make sure the tire is correctly installed.
An incorrectly installed tubular tire can come off the rim, causing you to
lose control and fall. Install the tires correctly and regularly inspect the
attachment and condition of the tires.
Clean tires with a weak, soapy solution. Do not use cleaners that contain hydrocarbons,
dilutants, or corrosives. Store tubular tires, on or off a rim, in a dry location, away from light,
and inflated to 70-90 psi (5-6 bar).
Note: See Chapter 4 for instructions on installing tubular tire.
WARNING
Every 100 Hours of Use
Have your hubs serviced by an authorized Bontrager Wheel Works dealer after every 100
hours or 6 months of use. More frequent service may be required for wheels under heavy usage.
Using Wheels with Disc Brakes
For wheels with disc brakes, make sure the brake rotor attachment (Figure 3 or Figure 4) is tight:
+
Tighten rotor bolts (Figure 3) to 45-55 Lb
•
in (5-6.2 N
•
m).
+
Tighten a Centerlock nut (Figure 4) to 350 Lb
•
in (40.2 N
•
m).
Figure 3. Rotor bolts
Figure 4. Centerlock nut
Содержание WHEEL
Страница 1: ...Wheel Owner s Manual ENGLISH ...
Страница 20: ...www bontrager com ...