background image

2

Tire and rim compatibility

The following chart shows which tires are compatible with 
which rims, and any parts that are needed to make the tires 
compatible with the rims.

Tubeless Ready tires do not hold air without either an inner 

tube or liquid sealant inside the tire. To use a Tubeless Ready 
tire in tubeless mode, follow these instructions to install 
Bontrager Super Juice sealant. Super Juice is a long-lasting, 
quick-acting, glycol-based sealant developed for this purpose. 

Standard UST tubeless tires are designed to hold air with-

out sealant, but using Bontrager Super Juice sealant in these 
tires will increase their puncture resistance and reduce their 
tendency to leak air.

Before you start: Tubeless tips

Tubeless tires fit tightly and require unique mounting 

procedures

There are some variations in the way tubeless tires from each 

Table 1- Tire and rim compatibility

Table 1- Tire and rim compatibility

Rims

Tires

Tubeless

Tubeless Ready

Standard

Standard 26” (ETRTO 599)

Standard 26” (ETRTO 599)

NO

YES- with inner tube

YES- with inner tube

UST (standard tubeless type)

UST (standard tubeless type)

YES

YES- with Super Juice or 
with inner tube

NO

Bontrager 

Bontrager 
Tubeless Compatible

Tubeless Compatible

YES

YES- with Super Juice or 
with inner tube

YES- with Super Juice or with 
inner tube

WARNING

Tubeless Ready tires require an inner tube or special sealant 

Tubeless Ready tires require an inner tube or special sealant 

to hold air. Air loss can cause loss of control resulting in 

to hold air. Air loss can cause loss of control resulting in 

personal injury or death. Use an inner tube, or follow the 

personal injury or death. Use an inner tube, or follow the 

instructions for Tubeless Ready sealant use.

instructions for Tubeless Ready sealant use.

Содержание Tubeless Ready Tire









Отзывы: