10
1. Place the de
vice on a smooth fla
t surface.
2. Ensure the de
t a distance from heaters and other sources of heat.
3. Where possible, avoid using extension c
ay sockets. It is advisable to
connect the device directly to the wall socket using the power cable (in accordance
with the technic
al specific
a
4. Plug the power cable into a standard 220-240-volt AC outlet.
The C220-A is capable of shredding up to 12 sheets of paper (DIN A4, 80g/m²) into cross
cut at once. Paper width
may not exceed 220mm. When shredding small pieces of paper,
such as envelopes or credit card receipts, the
paper should be inserted in the middle of
the slot. Please ensure that you never insert more than the stated
maximum quan
int
y damage the device.
Placing the shredder
Shredder c
apacity
Opera
the shredder
A main switch is located on the back of the machine, while a slide switch is on the top of
the device and can be set in thr
1.
AUTO:
when the device is connected to power, and the main switch on the back of the
machine is on, the power ligh
ocess is automa ally
ted as soon as paper or credit card is inserted into the corresponding feed slot.
Please do not insert any credit cards into the feed slot while shredding paper since the
device is incapable of shredding of paper a
edit cards. Once the
chosen material has fully passed thr
ocess will stop
automa ally.
2.
REV
is used t
o fix paper block
ages. This chang
fore an opera-
cle has ended enabling the blades to be released. If you realise that you have
uninten
ed too much paper, and the shredding process bec
bly slower, set the switch t
o remove excess paper.
3. The switch should be set to
OFF
if you wish to empty the paper basket, or do not inte-
nd to use the device for an ext
er doing so, unplug the device from
the power supply.
The device is only intended for indoor use and for an int
ent opera
maximum of 5 minutes. Do not use the shredder for commercial purposes or outdoors.
