manualshive.com logo in svg

Bonnet S200B11, Руководство по установке, Страница: 6 / 22

Поделиться
Скачать
Bonnet S200B11 Скачать руководство пользователя страница 6

n° 6BE648285NI-0606 – 

Page 4

1.3  Model 3x1C

S200B31 : Model 3x1C Stainless 1D to RHS
S201B31 : Model 3x1C Stainless 1D to LHS
S202B31 : Model 3x1C Stainless 1D central
S210B31 : Model 3x1C White 1D to RHS
S211B31 : Model 3x1C White 1D to LHS
S212B31 : Model 3x1C White 1D central

Roll in model shown with 1 door to the right and clearance
for a rear door (roll through).

(1) Defrost water drain (PVC pipe 

∅

20)

(2) Electrical connection (supply cable 3m long)
(3) Refrigeration connection (SG version)
(4) Height under evaporator housing 1900mm

Note :
- With a glass door operating at +3°C, the temperature
and humidity conditions required for operation without
condensation are +25°C and 65% RH or equivalent

LOCATION

The cabinet must be installed on a flat, smooth and
perfectly horizontal surface. A bead of silicone mastic is
required around the perimeter.

CONSTRUCTION

- Internal and external panels in austenitic stainless or
white plastic coated steel (except the external roof in
corrosion proof galvanised sheet).
- Slatted louvered compressor cover (not supplied with
models without compressor).

Insulated body

- Demountable panels assembled by a system of hooks.

- Expanded polyurethane foam insulation. 80mm thick
- Thermal break between cavity and outer structure.
- Floor fixing strips in austenitic stainless steel.
- Radiused stainless base (optional).

Door

- Removable magnetic door seal with base blade
- 2 rising hinges with stay open position and self closure,
avoids wear on the door base seal.
- Closure by central lockable handle and catch with
internal push button safety release.
- Door opening can be handed (if undertaken on site
new lexan signage will be required)

ELECTRICAL CHARACTERISTICS

Voltage

: 1~230V 50Hz+E

Max power

: 1250W

Protection

: aM 6

Unit supplied with a cable and plug
The installer is responsible for electrical protection of the
supply circuit

REFRIGERATION CHARACTERISTICS

Refrig power : 1200 W at -15/+55°C
Refrigerant

: R404A

Charge

: See units data plate

Compressor : Hermetic
Condenser

: air cooled

Evaporator

: Double flux ventilation, anti-corrosion
treated

Expansion

: Capillary (model without compressor

supplied with T.E.V.)

Defrost water : Two drain points (1) are provided at the

rear or the right hand side (connection
and traps to be provided by the installer).

Conforms to norms :

Electrical safety 

: EN 60 335-1

Food hygiene 

: XP U 60 010

Conforms to European directives for : CE

Содержание S200B11























Отзывы:

Нет отзывов