Bonnet S200B11 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 22

Bonnet S200B11 Скачать руководство пользователя страница 19

n° 6BE648285NI-0606 –

Page 17

3.4.6 FITTING THE FLOOR FINISHING KITS

(optional)

After cutting them to length, the PVC finishing strips are fixed to the cabinet using the

FB n°4.19 self tapping screws provided. Seal in place with silicone mastic.

Internal finishing strips are not compatible with the stainless floor base option.

3.4.7 REVERSING THE DOOR HANDING

On site this operation requires that a set of lexan labels be ordered.
1) After disengaging the door, swap the hinges and door catch fitted to the door frame

from right to left or vice versa.

2) Unscrew the part of the hinges fitted to the door and refit in the same place having

turned them upside down.

3) Swap the bottom door seal blade and the top light actuator positions over.
4) Remove the door labels and replace with new. Surplus glue can be removed with

thinners.

If the door doesn’t line up adjustment can be made using the 1.5mm PVC spacers

factory fitted behind each hinge.

Example: To realign a door that has dropped, remove a spacer from the upper hinge

and add to the lower hinge.

Model shown: Single door frame with right hand door

Light actuator

Door seal blade

240x210 Label
code S380P11 : With controls over
code S381P11 : No controls over

65x865
code S417P11 : With controls over
code S418P11 : No controls over

Brand label
code S110P02

Hinge on door frame

Door catch

Door hinge

1.5mm thick hinge spacers

«
...
17
18
19
20
21
...
»

Содержание S200B11























Отзывы:

Нет отзывов