manualshive.com logo in svg

Bonnet S200B11, Руководство по установке, Страница: 21 / 22

Поделиться
Скачать
Bonnet S200B11 Скачать руководство пользователя страница 21

n° 6BE648285NI-0606 – 

Page 19

4.  COMMISSIONING

4.1  GENERAL REQUIREMENTS

There are no particular requirements except to ensure that nothing obstructs the air flow

to the condenser and evaporator.

4.2  THERMOSTAT CONFIGURATION

To adjust the thermostat see the OPERATING MANUAL
Due to the inertia of the thermostat bulb the correct temperature will not be displayed

until after the initialisation is complete.

There are two levels of configuration:
Level 1

To adjust the differential

: code "r0"

For the password to access level 2

: code "PA"

Level 2

Starting from level 1 to select and modify all the parameters (password 
protected see the table of parameters)

4.2.1  PARAMETER CONFIGURATION
ACCESS TO LEVEL 1

Press both arrows (buttons 2 and 3) for 4 sec. "PA" appears in the display
Press the arrows (buttons 2 or 3)

To select the parameter to change

Then press SET (button 1) and adjust with
the arrows (buttons 2 or 3)

To see and then modify the value of the
selected parameter

ACCESS TO LEVEL 2 (starting from level 1 having selected parameter "PA")

Press and hold SET (button 1) and adjust
with the arrows (buttons 2 or 3)

To adjust the value "–19"

Press both arrows (buttons 2 and 3) for 4 sec. The first parameter of level 2 is displayed "/0"
Press the arrows (buttons 2 or 3)

To select the parameter to change

Then hold the SET (button 1) and adjust with
the arrows (buttons 2 or 3)

To see and then modify the value of the
selected parameter

To exit press both arrows at the same time (buttons 2 and 3) for 4 secs or wait at least 50
secs without touching anything.

c

"Set" button

d

 

Button to decrease a setting

e

 

Button to increase a setting

f

 

LED compressor running

g

LED defrost running

Содержание S200B11























Отзывы:

Нет отзывов