Page 8
3BE390954NU – 07/15
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
2.3 CLEANING MENU
Pressing the Cleaning/Tools button gives access to the
cleaning menu
Display shows “CLEA” (cleaning) in the timer zone and the
intensity in the temperature zone.
By default the last cycle used is displayed.
Possible selections:
- 3 cleaning intensities
- Rinse function
- Cleaning product priming
function
Intensity
Time
1
19 min
2
25 min
3
35 min
Rin
2 min
Pri
2 min
The priming function allows the detergent delivery circuit to
be refilled when the container is changed so that efficiency
is maintained
Pressing the “Start button” starts a wash cycle.
Pressing the Cleaning/Tools button or any
inactive zone exits this menu and returns to
the previous screen.
2.4 PROGRAMMES MENU
2.4.1 CONSULTING THE PROGRAMMES
The first press on the PROG/VALID button gives access to
saved programmes (recipes)
Display shows “Pr01” in the timer zone.
Moving the coder or the
/
buttons scrolls through the
programmes (Programmes No 01 to 18).
Note: the programmes are pre-recorded.
Only programmes that are not empty are displayed
The dots (white) in the “Start” zone indicate the number of
cooking phases in the programme (maximum 6 phases with
preheat)
Pressing “Start” launches the programme.
Pressing the PROG/VALID button or any
inactive zone exits this menu and returns to
the previous screen.
