BONNET PRO Mini Max Mule 220R Скачать руководство пользователя страница 7

7

This manual is only available online at bonnetpro.com.
It provides necessary operation and maintenance
instructions and an illustrated parts list.

Read this manual completely and understand the machine before 
operating or servicing it. this manual  cannot  cover all  safety issues 
and variables. It is up to the machine's operator to make a safe 
determination of the machine's use. 

Use the illustrated Parts Lists to order parts. Before
ordering parts or supplies, be sure to have your
machine model number and serial number handy.
Parts and supplies may be ordered by phone or mail
from any authorized parts and service center,
distributor or from any of the manufacturer’s
subsidiaries.

This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:

•  The machine is operated with reasonable care.

•  The machine is maintained regularly - per the machine care 

instructions provided.

•  The machine is maintained with manufacturer supplied or 

equivalent parts.

Bonnet Pro

4529 Bethlehem Pike
Telford, PA 18969
Phone: (215) 723-5330
www.bonnetpro.com

Specifications and parts are subject to change without notice.
Copyright 2016 Bonnet Pro. All rights reserved.
Printed in U.S.A.

operation

Please dispose of packaging materials 
and old machine components in a safe, 
environmentally way according to your 
local waste disposal regulations.

Always remember to recycle if possible.

Содержание Mini Max Mule 220R



















Отзывы: