bonitron M3628PCF, Руководство для пользователей

Страница: 18 / 32

M3628PCF
18
4.3.
C
ONTROL
(M
ODE
) S
WITCH
4.3.1.
C
HARGE
M
ODE
In Charge Mode, the M3628PCF supplies voltage to the output, charging to
the voltage setting on the voltage control knob. The internal charge
resistance limits output current. The voltage and current displays show the
present voltage on the load capacitor and the current being delivered to it.
4.3.2.
H
OLD
M
ODE
In Hold Mode, the M3628PCF disconnects the charger and discharger from
the output. Changes to the voltage control knob have no effect on the output
voltage.
The Output Voltage will be operational to indicate the voltage present on the
load. The Setpoint meter will indicate Ø.
4.3.3.
D
ISCHARGE
M
ODE
In Discharge Mode, the M3628PCF places a fixed resistance across the load,
and the load discharges through it.
The Output Voltage meter will be operational. The Current Meter will show
negative current.
CAUTION!
Extended discharging may cause overheating.
Do not discharge loads above 50000 joules.
Do not leave unit unattended during discharging.
4.4.
C
IRCUIT
B
REAKER
The unit is equipped with a circuit breaker to protect it from overload conditions. If the
input circuit breaker is tripped, it may be reset by pressing the button to reengage the
breaker.