bonitron M3628PCF, Руководство для пользователей

Страница: 17 / 32

User’s Manual
17
DANGER!
Always monitor the output voltage while operating the unit.
Ensure that the attached loads do not exceed their rated voltage, as
catastrophic damage, injury or death may occur!
4.2.5.
C
ONTROL
S
WITCH
The M3628PCF can be set to charge, discharge, or hold. The control switch
selects the operation mode. Individual modes are described in Section 4.3.
4.2.6.
V
OLTAGE
P
RESENT
I
NDICATOR
A red light indicates that there is voltage on the DC output of the unit.
DANGER!
Do not use this light as an indication that the output is safe to work on!
Always check the output with a working voltmeter before connecting or
disconnecting equipment, as the lamp may be malfunctioning!
Electrocution Hazard
– This unit produces dangerous levels of voltage
that can cause injury or death. Always follow safety protocols when
working with high voltages!
4.2.7.
O
VER
T
EMP
I
NDICATOR
A yellow light indicates that the internal case temperature has risen too high
for safe operation. Wait for the light to clear. This may take up to 30 minutes.