BONIS ST535, Руководство пользователя

Страница: 26 / 33

6.12 Completion of firing
While the kiln temperature is above 40°C the display alternates
every 5 seconds between the kiln temperature and Hot.
Upon completion of firing the ST535 lights all lamps on the mimic
display and the kiln is allowed to cool naturally.
When the kiln has cooled to less than 40°C the display alternates
every 5 seconds between the kiln temperature and End.
To return the ST215 back to idle condition ready for the next firing
press the
fn
key (or turn off the power to the instrument).
For your safety do not open the kiln before
temperature drops to 50C.
NOTE: Firing is completed when the main display shows “HOT”.
You can then switch off the kiln, and the mains fuse.
6.13 Useful operations
Energy Used
When not firing, and main display shows Current temperature push
◄
key to show the total amount of electrical energy used in KWH
during the last firing.
This information is stored while power is off and is only reset to
zero when a new firing is started.
Keyboard Lock Facility
The keys can be locked so that pressing them has no effect.
This is an anti-tamper feature used to ensure that the operation of
the ST535 or the program data cannot be altered by un-authorised
people.
26