BONFIRE 4 страница 28 Скачать руководство пользователя

Страница: 28 / 33

ver.2016 r1

CONVERTING TO NATURAL GAS

GAS

ORIFICE

CONVERSION

Each burner comes with a brass LP orifice on top of the NG orifice. When converting
the grill to natural gas, simply take off the LP orifice on each burner and leave the NG
orifice on.

For your safety, exercise caution, and make sure you have adequate hand protection,
such as gloves, when handling metal parts.

CONVERTING

THE

MAIN

BURNER

ORIFICES

1. Remove the cooking grid from above the burner you

are working on by lifting it first from the front and set
it aside.

2. Remove the flame tamer from above the burner you

are working on and set it aside.

3. Remove the cotter pin and lift the back end of the

burner out of the peg holes, then move the burner
toward the back of the grill to clear the gas inlet and
set it aside.

4. Insert the nut driver that comes with the grill into the

peg hole and unscrew the LP orifice. Make sure you
only take out the LP orifice and leave the NG orifice
on.

Toll Free: (855) 678-0088

bonfireoutdoor.com

Page 28

WARNING:

Hazardous overheating will occur if a natural-gas orifice is used with propane gas.

CAUTION:

Make sure the grill is at a safe temperature and isolated from gas and electrical
supplies before beginning.

Содержание 4


































Результаты поиска

Содержание 4

Отзывы:

Похожие инструкции для 4

Бренды по названию

Популярные бренды

BONFIRE 4, Инструкция по установке и руководство пользователя

Результаты поиска

Содержание 4

Отзывы:

Похожие инструкции для 4

Бренды по названию

Популярные бренды