Bondtech Raise3D N1, Сборка и инструкция по установке

Страница: 24 / 26

Installation manual Bondtech Raise3D V2.0 23
Electronic Configuration
Adjustment of the stepper driver current
The stepper driver needs to be adjusted due to that we have changed the previous
motor to a smaller one that requires lower current. There is a risk that the motor
getting overheated and damagaged
If we don’t do the adjustment.
•
You need:
- A Multimeter
- A Sharp tool
•
The electronic box is on the left
side of the printer.
•
Depending on which cover your
machine has, either use a sharp
tool or a hex wrench to take the
cover of.
•
Tip! Grind the tip on the probe to
make it easier to do the
adjustment. Shape the tip like a
small flat screw driver.