Bondtech Raise3D N1, Сборка и инструкция по установке

Страница: 18 / 26

Installation manual Bondtech Raise3D V2.0 17
•
You will have to change position
of two wires in the
“L” connector
to change the rotation direction.
•
To reverse two cables, you can
use a sharp tool to lift the little
plastic tab on the connector and
gently pull the crimping contact
out of the housing with your
fingers.
•
Do the same with the cable next
to the first one.
•
Change positions of those two
cables by pushing it back into
place. Position 1 and 3 change
position.
•
Like this!