GSS2520JA
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated assembly time: 30 minutes.
AA
M6 x 15 Bolt
2 PCS
Step 1 (D
oor magnet assembly
)
Note: Before beginning assembly, make certain the two swivel
casters on the cart base (A) are locked.
a) Align the hole on the front middle side of cart base (A) with the
hole on the latch magnet (X).
b)
Insert the M6 x 15 bolt into each pre-drilled hole.
c)
Tighten two bolts using the screwdriver provided.
AA
M6 x 15 Bolt
4 PCS
Step 3 (Cart back panel assembly)
a) Align the holes on cart left panel (B) with the holes on the
cart back panel (D).
b) Insert one M6 x 15 bolt (AA) into each pre-drilled hole and
tighten the bolt by hand.
c) Repeat the procedure with cart right panel (C) and cart
back panel (D).
d) Go back and tighten all bolts using screwdriver provided.
Step 2 (C
art side panel assembly
)
a) Loosen the six pre-installed bolts on the cart base and
allow 1/4 bolt’s length to extend from the cart base (A).
b) Align the holes upon the left side of cart base (A) with
the holes on the cart left panel (B) and tighten the
pre-installed bolts by hand.
c) Repeat the procedure with the cart right panel (C) on
the upper right side of cart base (A).
d) Go back and tighten all bolts using the screwdriver
provided.
