GSS2520JA
Owner’s Manual
8
AA
M6 x 15 Bolt
4 PCS
CC
M6 Flat Washer
4 PCS
DD
M6 Lock Washer
4 PCS
BB
M4 x 10 bolt
2 PCS
EE
M Flat Washer
2 PCS
BB
M4 x 10 bolt
2 PCS
EE
M Flat Washer
2 PCS
Step 6 (Spare tank rejector assembly)
a) Align the holes on the two tips of spare tank rejector
(F) with hole on the cart base (A) and the hole on the
cart back panel (D).
b) Insert one M4 x 10 bolt (BB) and one M4 flat washer
(EE) into each pre-drilled holes.
c) Tighten all the bolts using the screwdriver provided.
Step 4 (Front beam assembly)
a) Align the holes on cart left panel (B) with the holes on
front beam (E).
b) Insert one M6 x 15 bolt (AA), one M6 flat washer (CC) and
one M6 lock washer (DD) into each pre-drilled hole and
tighten the bolt by hand.
c) Repeat the procedure with hole cart right panel (C) and
front beam (E).
d) Go back and tighten all bolts using screwdriver provided.
Step 5 (Gas tank bracket assembly)
a)
Align the holes on the gas tank bracket (G) with the
holes on the cart back panel (D).
b)
Insert one M4 x 10 bolt (BB) and one M4 flat
washer (EE) into the each pre-drilled hole.
c)
Tighten all the bolts using the screwdriver provided.
