GSS2116B
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated assembly time: 30 minutes.
AA
M6 x 15 Bolt
8 PCS
BB
M6 Flat washer
8 PCS
CC
M6 Lock washer
8 PCS
AA
M6 x 15 Bolt
2 PCS
BB
M6 Flat washer
2 PCS
CC
M6 Lock washer
2 PCS
Step 1 (Wheel and wheel axle assembly)
a) Align the hole on the bottom of bottom panel (G)
with the hole on the wheel (Q), insert the wheel
axle (R) into each hole of wheel.
b) Screw the M6 x 15 bolt (AA), flat washer (BB)
and lock washer (CC) into each pre-drilled
holes by hand.
c) Tighten all bolts using the screwdriver provided.
Step 2 (Latch magnet assembly)
a) Align the hole on the latch magnet ( I ) with the hole on
the bottom panel ( G )
b) Screw the M6 x 15 bolt (AA), flat washer (BB) and lock
washer (CC) into each pre-drilled holes by hand
c) Tighten all bolts using the screwdriver provided.
Step 3 (Left side panel and right side panel
assembly)
a) Loosen the four pre-installed bolts on the bottom
panel (G) and allow 1/4 bolt’s length to extend
from the bottom panel (G).
b) Align the holes on the left side panel (E) with the
holes on the bottom panel (G) and tighten the
pre-installed bolts by hand.
c) Repeat the procedure with the right side panel (S)
on the bottom panel (G).
d) Go back and tighten all bolts using the screwdriver
provided.
