background image

Bond Manufacturing Co., Inc.  |  Page 2

Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so 
may r

SAFETY INFORMATION

WARNING

r

r

THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product shall be used outdoors, in a 

ventilated space and shall not be used in any enclosed area. 

r

This unit is to be used with propane gas only! (sold separately) 

r

Do not attach a remote gas supply to this unit. 

r

Only use propane gas for this unit.

r

S

olid fuels shall not be burned in this appliance.

r
r

LP GAS WARNING: Do not use any more than 1/4in depth lava rocks/pumice stones/LavaGlass

®

above the bur

r

If the propane gas tank is leaking gas, you may hear, see, or smell a hiss. Do the following:

e department for help. 

r

Applying too much propane may result in gas pooling and will not burn. Allow fresh air into the unit 

so that the remaining gas may escape. 

r
r

Manifold pressure: 11 inch w.c. (2.74kPa).

r
r

You must use a propane tank that has a collar to protect the gas valve.

r
r

The tank system must be set up for vapor withdrawal. 

r

Discontinue use if any part of the propane tank is damaged. Rust and dents may be hazardous and 

should be inspected by a gas supplier. 

r
r

rocks/pumice stones/LavaGlass

®

could pop out and cause injury. Should any rocks pop out, discard 

them.

r

Always ensure that lava rocks/pumice stones/LavaGlass

®

 are completely dry before use. Failure to 

do so will cause them to crack or pop.

r

Do not operate unit until all parts are fully assembled.

r

Do not paint or color any part of this heating unit.

r

Unit may be hot while in use, do not attempt to move it while in use.

r

Never leave this heating unit unattended while in use. 

r

This unit is not intended for cooking.

r
r

Keep a safe distance to avoid burning skin or clothing. 

r

Do not sit or rest hands or feet on this heating unit. 

r
r

Keep all electrical cords and fuel supply hose away from heated surfaces.

Use LP propane tanks with the following dimensions: diameter 12 in, height 18 in - capacity 20 lbs.

The installation of this unit must adhere to local codes or Propane Storage and Handling Code, 

CSA B149.2.

Содержание 50857N













Отзывы: