1.5mm
9
TP Screw (2.3x8mm)
Ply (15x15x3mm)
9
Epoxy plies inside the fuselage under the cowing and
mount the cowing with TP screw as illustration.
9
TP Screw (2.3x8mm)
Ply (15x15x3mm)
9
pvc part
1
pvc part
2
pvc part
2
pvc part
2
pvc part
2
Epxy the canopy to the fuselage.
Trim the cowling for engine and muffler.
Assemble the cowling .
Cut away the surplus parts of plastic cover
carefully along the shaded line.
The side view of the plane.
63
61
62
64
12
60
Accessory list for the coming installation steps.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Make sure hinges are
mounted in the same line.
1mm
Aileron
Tailing
edge
Make sure they are in
the right position while
installing.
6
Pin hinge(24x24mm)
8
6
2
2
2
4
2
2
2
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Pin hinge(24x24mm)
Screw (3x45mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
Clevis
Retainer
Rod (2x300mm)
Screw (2x10mm)
Install the servo as the illustration below.
Install the nylon control horn and connect the linkage.
Apply instant type CA glue to aileron and pin hinge.
Keep some space about 1mm width between
aileron and trailing edge.
Assemble the aileron to main wing with instant type CA glue.Be careful
to ensure the moving parts of the hinges are able to move freely.
1
2
3
4
5
1
Accessory list for the coming installation steps.
