Bona
®
Power Station Plus Manual
6
Bona.com
800.872.5515
Directions
The Bona
®
Power Station Plus is the safe, inexpensive and convenient way to protect your valuable floor sanding equipment from high
or low-voltage power situations. Use it as a power center to centrally connect your installation and floor sanding equipment. Use it to
effectively run your floor sanding and vacuuming equipment and adjust the power for your 230V units if your power supply drifts from
the desired voltage range.
You have the choice of using the Bona Power Station Plus as a static power center for your 230V and 115V equipment or as a buck/
booster for the 230V equipment when the circumstances dictate. Read the LED meter occasionally to see if the voltage feed from
your primary power source has changed enough to warrant a boost or decrease in power. The 115-volt (non-boosted) outlet offers
a convenient 20 Amp power source protected internally via a circuit breaker with an external reset button (This circuit breaker offers
equipment protection from power surges).
Maintenance, Service & Repairs
To keep the machine in a safe and functioning condition, perform maintenance on the machine regularly. Always disconnect the power
cable to the machine before cleaning, changing tools, performing maintenance, or replacing worn parts.
The Bona
®
Power Station Plus is a high-quality machine and is tested by authorized test staff at the factory before delivery. However,
electrical and mechanical parts wear down and age during long-term use. Only Bona's original parts may be used because the machine
is considered unique; otherwise, safety functions can become impaired. When you contact Bona or staff approved by Bona in the event
of a fault or to order spare parts, always specify the type and serial number of your machine. This information is located on the data
plate of the machine. The machine may never be cleaned using a high-pressure washer or hose.
To locate a list of spare parts and exploded views for the Bona Power Station Plus and other machines in our product range, visit
http://spareparts.bona.com/
During the factory warranty period, repairs may only be carried out by Bona or staff approved by Bona. Other repairs (after the warranty
period) of mechanical or electrical parts on the machine may only be carried out by Bona or staff approved by Bona who has experience
and knowledge concerning safety regulations.
Maintenance
Service
Spare parts and exploded views
