7
NOTE:
The reading and understanding of the Owner’s Manual is imperative prior to operating this machine. If you or your operator(s)
cannot read English, have this manual explained fully before attempting to operate this machine. Children should be supervised to
ensure that they do not play with the appliance. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
DANGER
means: You or other staff can suffer a serious injury or death if the instructions marked
with
DANGER
on this machine or in these user instructions are ignored or not followed. Read the
entire user manual before you use the machine.
WARNING
means: You or other staff can suffer an injury if the instructions marked with
WARNING
on this machine or in this user manual are ignored or not followed. The machine or other property
may also be damaged if instructions marked with
WARNING
are ignored.
Under adverse conditions, a mixture of dust and air can be explosive. Sanding/polishing wooden
floors can create an environment that can be explosive. The safety routines below must be followed:
•
Cigarette lighters, control lamps and all other sources of ignition can cause explosions if they
are active during sanding. All sources of ignition should be extinguished or, if possible, removed
completely from the work area.
•
In work areas with poor ventilation, an explosive environment can occur if certain flammable
materials (solvents, thinners, alcohol, fuel, certain polishes, wood dust, etc) are in the
atmosphere. Floor grinders can cause slightly flammable materials and vapors to burn. Read the
manufacturer's label on all chemicals to be used so that you can determine the flammability.
Ensure that the work area always has good ventilation.
•
Hitting a nail during sanding can produce sparks and cause an explosion or fire. Always use a
hammer to pound in any metal pieces before sanding the floor. Always keep a fire extinguisher
(ABC-class or water) available.
Use of a machine that is not complete or that is not fully mounted can result in personal injury
or damage to property. Never use these machines before they are fully mounted. Ensure that all
fastening devices are fixed. Make adjustments as defined in the machine specifications.
Read through the safety instructions carefully and inform your employees and users so no one comes to harm when using the machine.
Then, save the instructions. The manufacturer is not liable for personal injury or machine damage due to incorrect operation of the
machine. The machine may only be used by authorized persons that have been trained in its function.
Voltage:
Make sure the voltage stated on the machine's rating plate corresponds to the voltage in the power outlet before you start
the machine.
Safety Instructions
Содержание FlexiSand Power Drive
Страница 1: ...Bona FlexiSand Power Drive Operating Manual ...
Страница 19: ...19 Additional Notes ...
Страница 20: ...bona com 800 872 5515 REV092816 ...