Bona FlexiSand Power Drive, Руководство по эксплуатации

Страница: 13 / 20

13
Bona
®
FlexiSand Power Drive
™
in General (Cont.)
Handling
The user is expressly obliged only to use the machine in accordance with this manual. If the machine is used in any other manner, this
is solely at the user's own risk. The manufacturer's liability ceases fully in this case.
The machine may not be used in areas where explosive or flammable substances are stored or manufactured (petrol, thinners, fuel oil,
solvents, etc.). The machine's electrical components and mechanical parts can cause these substances to ignite.
Never work with worn, damaged or incorrect equipment, which can cause damage to the floor.
The power cable with extension may not exceed 50 ft (15.24m). Longer lengths should incorporate the Bona
®
Power Station
™
.
When the machine is not in use, the power cable must be disconnected from the wall socket in order to prevent damage to the floor
and unlawful use. For transport in lifts, the applicable user and safety instructions must be followed, especially where load capacity is
concerned. In order to prevent unauthorized use of the machine, it must always be stored in a suitable location. Regularly check the
power cable and the machine for wear or aging.
The Bona
®
FlexiSand Power Drive
™
can be used for many different types of floor preparation/sanding depending on the type of drive
plate mounted to the machine. As a standard, one Drive Plate is included on delivery which can be used to drive nylon pads, screens
and abrasives, etc. Always use a soft pad underneath the Drive Plate before attaching screens and abrasives. Never use the Drive Plate
directly towards the floor.
For instructions on using another drive plate, see the instructions for that drive plate.
Normal use (cont.)
Risks