Bona FlexiSand
5
Because dust from sanding (i.e. red lead, certain types of wood and metals) are hazardous to health, a face
mask of at least class P2 must be used.
There is a risk of damage to the eyes and/or body if protective clothing and/or protective equipment is not used during sanding.
Always use protective glasses, protective clothing, ear protection and a face mask of at least class P2 during sanding.
Use ear protection
Use face mask
Read manual and
safety instructions
Dangerous High
voltage
Do not touch
For minimized dust environment use a vacuum cleaner intended for wooden dust.
The air flow on the vacuum cleaner should at least be 245m3/h.
We strongly recommend Bona DCS system for best result.
Store contained wooden dust outdoors in a safe place, due to the risk of fire. Never leave contained wooden dust without
supervision.
Always keep a
fire extinguisher (ABC-class or water) available.
Take precautionary measures to ensure that the machine is not damaged during transport.
Be careful with cords.
Use the correct power cord with the correct length (see accessories list).
Never carry the machine by the cord.
Never pull power cords from the machine or wall socket with strong movements.
Protect the power cords against heat, oil and sharp
edges. Power cords longer than 10m should not be used.
Remove the power cord from the machine when it is not in use.
Ensure that the machine does not start unintentionally.
Never carry
a connected machine.
Ensure that the breaker is not on once the machine is connected to a power socket.
Never use the machine
if the start handle does not function as it should.
Inspect the machine regularly.
If you discover damaged parts, replace them at once.
If necessary, contact the manufacturer, an
authorized reseller or service partner.
Note!
Because of this construction is in many ways unique u
se of other spare parts and
accessories than Bona original spare parts can cause a risk of personal injury and/or damage to the machine.
Ensure that the machine is always in good condition.
Keep the machine clean for better and safer use.
Follow the instructions
concerning the replacement of accessories.
Inspect the power cords regularly.
Repair or replace defective parts if they are
damaged.
Store the machine in a dry and locked area when not in use.
Do not forget to put on the tool before you start the machine.
Always check that the sanding paper is correctly adjusted before you
begin sanding.
Keep the handle clean and free from grease.
Keep unauthorized persons away from the work site.
Do not allow unauthorized persons to come into contact with the machine or
power cords.
Do not misuse the machine.
The machine works better when it is used according to its capacity and design.
Allow the motor to
“rest” during periods of heavier use.
The motor will cool better, thus increasing its lifespan.
Use fuses with the correct ampere
number in relation to the motor.
Never use a machine for anything else other than sanding, polishing and oiling of wooden floors.
Service or repairs performed by unauthorized persons can cause damage or accidents.
If service and repairs are performed by
unauthorized persons, the warranty may become invalid.
Service and repairs must be performed by Bona or retailers authorized by
Bona.
Be aware when you work.
Use common sense.
Do not use the machine if you are tired, have consumed alcohol or have taken
medication that can affect your judgment or your body control.
Due to the potential fire hazard involved with sanding dust, smoking
is not permitted while sanding.
Always use earth fault
breaker!
