Bona FlexiSand
3
Technical data
Bona FlexiSand
EU
USA
Motor type:
1 phase
1 phase
Voltage (+/- 10%):
230VAC
120VAC
Frequency:
50/60 Hz
60Hz
Power:
1,1kW
1.5 HP
Rated current:
8A
15A
Recommended fuses:
10A (slow fuse)
15A
Insulation class:
F
F1
Protection class:
IP54
IP54
Abrasive disc speed: (unloaded)
350/225 rpm.
175 rpm.
Total weight:
40kg (45kg with extra weight on the motor)
101.41 lbs.
Diameter of disc:
407mm
16”
Hour counter
<99 999 hours
<99 999 hours
Height/Width/Depth
1170mm/ 490mm/ 640mm
46”/ 19,3”/ 25,2”
Noise measurement according to SS-EN ISO 3746:1995 & SS-EN ISO 11202:1995:
Pad + Screen 100
Pad
Abrasive 100
Noise level:
80,0 dB(A)
71,3 dB(A)
82,2 dB(A)
Calculated sound effect:
94,7 dB
80,1 dB
95,6 dB
Vibration measurements according to SS-EN ISO 5349-2:2001:
X
Y
Z
X Y
Z
X Y
Z
Vibrations RMS (m/s²)
0,96 1,1
1,5
1,3 1,3
1,8
0,9 1,0
1,1
Vibrations vector sum (m/s²)
2,1 2,6 1,7
According to used standard SS-EN ISO 3746:1995 is the highest standard discrepancy for reproducing 3 dB defined, according to ISO 7574-1.
According to Swedish Work Environment Authority the measure uncertainty at vibrations measurements estimated to 20-40%.
The thing that contributes to the measuring uncertainty is the transfer of vibrations to the accelerometer.
We congratulate you to the choice of your new Bona FlexiSand for
sanding, oiling and polishing!
Carefully read through the entire user manual before you begin working with the
machine. If anything is unclear, turn to your reseller with confidence or to Bona
AB.
Safety instructions
Read through the safety instructions carefully and inform your employees and users, so no one comes to
harm when using the machine. Then save the instructions!
The manufacturer is not liable for personal injury or machine damage due to incorrect operation of the
machine!
The machine is only built for sanding, oiling and polishing of wooden floors!
The machine may only be used by authorized persons that have been trained in its function.
Voltage:
Make sure the voltage stated on the machine’s rating plate corresponds to the voltage in the
power outlet before you start the machine.
NOTE!
It is obligatory to read and understand the user manual before the machine is used.
