Bona
Edge
Machine use:
The machine is intended for the edge sanding of wooden floors, parquet floors as well as cork floors. It
maybe used on newly laid and untreated floors and existing floors that have been treated with lacquer or
oil.
The main function of the machine is to serve as a complement to a belt or a drum sander for sanding
edges.
The machine is designed in accordance with latest information regarding ergonomics, safety and
efficiency. The machine has been thoroughly checked and approved before leaving the factory.
Working method
When sanding hold the machine, use both handles and move the machine in
circles in the direction of rotation over the surface which is to be sanded. It is
important that the machine rests on three points, both the wheels and the sanding
disc. The best result is obtained by letting the machine work with its own weight.
When using fine abrasives you must be careful not to make any burn marks due to
high friction created.
In addition to the points noted the sanding must be adapted to the type, patter and
composition of the floor.
Assembly and replacing the dust bag
1.
2.
Starting
1.
Don’t forget the earth fault
breaker.
2.
Starting position
8
