Bona
Edge
Changing sanding material
N.B. Changing sanding material must be made on an unconnected machine!
Never start the machine before a sanding disc is attached.
1.
Lay the edge sander
carefully on its left side.
Regularly check the
sanding disc. If the
sanding disc is worn out or
has become clogged by
lacquer or paint, the
sanding result deteriorates
and the surface of wood
may become discoloured.
2. Always use Bona’s sanding
discs of the correct size and
stable rear side. Only abrasive
paper suitable for sanding of
wooden floors should be used.
3. Check that the sanding
disc is centred.
Changing sanding disc with hole
1. Removing sanding disc with hole.
Use box spanner NV17.
Changing velcro disc
1. If the Velcro disc is worn,
scrape the disc off with a
knife.
2. Clean the steel disc with
alcohol or similar.
Glue a new Velcro disc on the
steel plate.
3. Check that the disc is
positioned. A disc that
is not centred may
cause unbalances and
vibrations.
10
