background image

Bona Dual Edge Manual

10

bona.com

Commencing Operation (Cont.)

Prevention Measures for Users

Removing sawdust generated during use

Personal safety measures

Sawdust can ignite spontaneously and cause injury or damage. It must be disposed of properly. Always 

empty sawdust into metal containers located outside the building. Empty the contents of the dust bag when 

it is 1/3 full. Empty the dust bag at the end of each machine use. Never leave the dust bag unattended when it 

contains sawdust. 

DO NOT

 empty the contents of the dust bag above a fire.

Sawdust can spread through the air and be inhaled when using the sander. Always wear a dust mask when 

using the sanding equipment.

The eyes and/or body may suffer injury if personal safety clothing is not used. Always wear safety goggles, 

protective clothing and a dust mask during sanding operations.

Lengthy exposure to noise levels during sanding operations may damage the hearing. Always use ear 

protectors during sanding operations.

Never become distracted during sanding operations, check what is happening continually. Use common 

sense. 

DO NOT

 use the machine when tired.

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause injury or damage to people or objects. 

DO NOT

 

use the machine when it is not fully assembled. Keep all fittings tightly closed. Maintain machine settings in 

accordance with the specifications.

Using the machine without the safety guards and covers in position may cause injury or damage. Always 

ensure that all safety guards and covers are in position and secured well.

Содержание Dual Edge





























Отзывы: