manualshive.com logo in svg

Bona Dual Edge, Руководство по эксплуатации и техническому обслуживанию, Страница: 9 / 28

Поделиться
Скачать
Bona Dual Edge Скачать руководство пользователя страница 9

9

Commencing Operation (Cont.)

Instructions for electrical connection (cont.)

If the machine is used with a damaged plug or power supply cable, death may occur from electrocution. 

If cables or plugs are worn or damaged in any way, have them replaced by the manufacturer or certified 

machine repair center in order to prevent risks to safety.

Cables, extensions and plugs

Only use approved cables. The maximum recommended cable length is 7m; for greater lengths use cables with a larger 

cross-section.

Tampering with the grounding plug in any way may result in death from electrocution. 

DO NOT

 cut, 

remove or break the grounding plug. If the socket does not match the plug consult a qualified electrician.

Do not use the machine if the switch malfunctions

Using the machine with unsuitable and/or excessively long cables may cause injury or damage to people or 

objects.

The machine must never be moved using its cable and the cable must never be pulled when disconnecting 

from the socket. 

Keep the cable away from sources of heat, oil and sharp edges.

MACHINE WITH 230V~50Hz MOTOR

For machines with a 230-240V~50Hz motor (EU), a HO5VV-F 2x1.5mm

2

 HAR-approved power supply cable must be used along with an approved 

SCHUKO 2P+E 16A 200÷250V plug.

Содержание Dual Edge





























Отзывы:

Нет отзывов