Bona AMO310002, Руководство по эксплуатации

Страница: 11 / 24

11
Commencing Operation
Place the dust skirt in the intended notch on the rubber strip.
Never use the dust skirt when oiling. Always remove the
skirt when transporting the machine.
Assembling the dust skirt
Attaching dust containment
Attach the dust containment hose to the dust tube on the
Bona
®
FlexiSand 1.9.
If using Bona
®
DCS
™
, connect DCS
™
cuff to dust tube.
The air flow on the vacuum should be at least 245m³/h.
This machine only operates with the voltage and frequency shown on the machine data plate. Before
connecting the cable to the power supply ensure the correct voltage and frequency
are available.
DO NOT expose the machine to rain. This machine is intended for dry use only.
Keep the machine in a dry building and DO NOT use it in damp or wet places.
If the machine is not connected correctly to the electricity network, death due to electrocution may
occur. To prevent electric shocks always use a grounded three wire electrical system. For maximum
protection against electric shocks use a circuit protected with a differential cut-out switch.
Tampering with the grounding plug in any way may result in death from electrocution. DO NOT cut,
remove or break the grounding plug. If the socket does not match the plug consult a
qualified electrician.
Instructions for electrical connection