bon E-20 SE, Инструкция по эксплуатации

Страница: 10 / 23

5 Operation
bon E-20 SE
5.3 Description and function of the components
Please ensure that the refraction unit is connected to the power supply with the intended
power cable.
5.3.1 Translation table
The translation table serves to carry ophthalmic instruments such as slit lamps and
ophthalmometers. These instruments can be moved using the table into position 1 and
position 2.
Power Supply for the table top devices
Power is supplied to the table top devices via the connection ports in the translation table. To
configure / change the power supply please contact the bon Optic qualified personnel.
More detailed information on power supply can be found in chapter 8: Technical Data.
Power will be supplied automatically to the table top device on switching into working position
1 or 2. The translation table ensures a via a potentiometer the smooth introduction of power
(for e.g. the brightness adjustment on the slit lamp).
Operation
1) Swing the translation table into the required position.
2) Lock the table in position.
3) Slide the table into the required working position 1 or 2.
4) In order to swing back out of the way unlock the table.
When the refraction unit is switched off the table lock retains it’s status from prior to switch
off. That means that after switching on the refraction unit again, the table lock is activated if
the table lock was in the on position when the refraction unit was last switched off.
Fig. 5-2: Switch for locking the table
Try not to be forceful when activating/deactivating the table lock!
10/23