Bompani BOWM114/E, Руководство по стирке

Страница: 9 / 24

SM3017
9
WASHING GUIDE
Detergent drawer:
1 Prewash
Softener
2 Washing
EN
WASH IN THE CORRECT WAY
Before attempting to operate the washing machine, ensure that the installation has been per-
formed correctly, as described in the instruction booklet.
Daily use
1. Before putting clothes in the washing machine, empty the pockets of any hard or sharp object (nails,
screws, coins, pins and stones) that may damage the machine and garments.
2. To improve washing performance, introduce laundry into the washing machine without compressing
it or overloading the machine. A whole load of highly absorbent fabrics, such as bathrobes and
towels, can unbalance the machine during the spin cycle. The automatic load balancing system
arranges laundry in the most even manner possible, and sets the optimum spin speed to minimise
any vibrations.
3. Close the door making sure that garments are not caught between the seal and the door.
4. Put the correct amount of detergent in the drawer 2. Insert the bulkhead supplied if you are using
liquid detergent. If you want to enable the prewash option, add the detergent in the drawer 1. Use
the drawer marked with the special symbol for the softener. After adding the detergent, gently
close the drawer.
5. Select the wash program most suitable to the type of fabrics by using knob I following the instructions
in the programs table. The LCD display will show the duration of the selected program with a full
load. The remaining time may vary during the course of the wash cycle according to the load. The
word End will appear on the display at the end of the cycle.
6. Pressing the C button, a different spin speed to that provided by the selected program can be set.
The B button allows you to delay the start of the wash cycle up to a maximum of 19 hours. Both
values are shown on the LCD Display.
7. Buttons D, E, F and G allow the selection of supplementary functions. The options selected are
shown on the LCD display. The duration of the wash cycle varies depending on the options enabled.
8. Press the start button H to start the wash cycle. On the display, the duration of the cycle with full
load will be displayed. The easy logic system will update the remaining time during the cycle based
on the actual load inserted.
9. The end of the wash cycle is indicated on the display with the words End Turn the knob I to the
OFF position and open the door to take out all the laundry.
10. The program can be cancelled at any time by turning knob I to the OFF position.
Control panel:
A LCD Display
B Delay/lock control button
C Spin button
D Prewash/disinfection button
E Turbo/lock control button
F Rinse button
G Anti-crease button
H Start/pause button
I Program setting knob