9
Warning:
Turn off the power to remove or attach the contra angle
Do not use the contra angle other than manufacturer specifies
Check that the contra angle is securely connected to the central unit
2.4 Mounting and Removing File
Mounting: Insert file to contra angle, lightly turn
the file until it engages with the latch mechanism.
Removing: Press the push-key and pull out the file
2.5 Charging
a)
Insert the power cord jack into the inlet at the back of the battery charger. (Fig. a)
b)
Insert the power cord and plug in. Make sure you have the correct model.(Fig. b)
c)
Turn on the power switch. At this time, check that the power lamp lights up.
d)
Insert the central unit into the battery charge. Charging starts with the charge mark flashing on oled
screen. (Fig. c) When the buzzer sounds and is played on the oled screen, charging is completed.
The central unit can be charged directly by USB cable.
Please ensure the central unit and the battery charger is placed in dry and clean condition.
Never use the battery charger for anything other than the device of this product by
manufacturer.
The charging normally takes approx. 90 minutes, but it depends on battery use conditions,
battery freshness, ambient temperature, etc.
Under the charging condition, the central unit was not allowed to rotate.
The completely discharged will cause the damage of the battery. The user should charge the
battery completely once a month if the central unit will not be used for long term.
Pull out the central unit from the charger base up straightly after the battery fully charged.
Warning:
When the central unit is charging, but the buzzer does not sound and the charging animation is
not displayed, please take the central unit out from the battery charger, check the ”ERROR
CODE” to find out the problem.