5
2.1.2 Testing interface introduction
Picture 5（a）shows root canal file in the
dynamic operation of teeth in the solution. When
not examined, no root canal file; after detected
data, the corresponding schematic diagram will
display according to the different position in the
file teeth; when the tip of the root canal file arrived
near the root of tooth, tooth solution of plane map
will display the blue circle represents the position
of amplification.
Picture 5（b）is enlarged display area. When the root canal file did not reach
near the root tip, the entire root apex area is gray. When the needle slowly close
Display the torque(N.cm) of connected device when the Bluetooth is on
Display the rotation speed(r/min) of connected device when the Bluetooth
is on
Display the working mode of connected device when the Bluetooth is on
Display the type of connected device when the Bluetooth is on
This icon will appear when the measurement result is beyond the root tip
This icon will appear when the measurement results are in pre-setting
the root tip
Connection test, when the measurement line short circuit will appear this icon
Demo mode, this icon will appear when the device is in demo mode
Picture 5（a）
