![BOMBARDIER Quest 500 2002 Скачать руководство пользователя страница 76](http://html1.mh-extra.com/html/bombardier/quest-500-2002/quest-500-2002_operators-manual_2786165076.webp)
74
Unscrew the bleeding screw on the
top of thermostat housing.
1. Bleeding screw
Drain the system completely and rein-
stall the drain plug.
Pinch hose between radiator and ther-
mostat housing with a large hose
pincher (P/N 529 032 500).
Fill the radiator until the coolant comes
out by the thermostat housing hole. In-
stall the bleeding screw then remove
the hose pincher.
Complete the radiator filling.
Check the level in the coolant reservoir
and refill if necessary.
Run engine at idle with the radiator cap
off. Slowly add additional coolant if
necessary.
At this point, wait until engine reaches
normal operating temperature. De-
press the throttle lever two or three
times; then add coolant if required.
Install radiator cap. Inspect all connec-
tions for leaks and check coolant level
in the reservoir.
Valve Adjustment
Valve adjustment is not required on this
engine.
Spark Arrester
The muffler must be periodically purged
of accumulated carbon.
Select a well-ventilated area and make
sure the muffler is cool.
Place transmission on PARK position.
Remove the clean-out plug from muffler.
TYPICAL
1. Clean-out plug
2. Muffler
V04C0BY
1
V04C0CY
WARNING
Never run engine in an enclosed
area. Never perform this opera-
tion immediately after the engine
has been run because exhaust
system is very hot. Make sure that
there are no combustible materi-
als in the area. Wear eye protec-
tion and gloves. Never stand be-
hind the vehicle while purging
exhaust system. Respect all ap-
plicable laws and regulations.
V04C0DY
1
2
vmo2002_004a.book Page 74 Friday, August 3, 2001 10:27 AM
Содержание Quest 500 2002
Страница 1: ......
Страница 46: ...44 Label 8 Label 9 Label 10 Label 11 Label 12 V04M07Y V01M09Z V01M0BZ V04M08Y V04M0AL...
Страница 100: ......