61
Remove seat.
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.
NOTE:
When checking level at tem-
perature lower than 20°C (69°F), it may
be slightly lower than MIN. mark.
Add coolant up to MAX. mark if re-
quired. Use a funnel to avoid spillage.
Do not overfill
.
Properly reinstall and tighten filler cap
and reinstall seat.
If the coolant is added in the coolant
reservoir, check the level in the radia-
tor too. Add coolant if necessary.
NOTE:
A cooling system that frequent-
ly requires coolant is the indication of
leaks or engine problems. See an au-
thorized Bombardier ATV dealer.
Coolant Replacement
Refer to MAINTENANCE section.
Brake Fluid
Recommended Fluid
Always use brake fluid meeting the
specification DOT 4 only.
CAUTION:
Never use other type of
oil such as mineral-based or syn-
thetic oil.
Fluid Level
With vehicle on a level surface, check
brake fluid in reservoir for proper level.
It should be above MIN. mark.
Add fluid as required.
Do not overfill.
Clean filler cap before removing.
CAUTION:
Use only DOT 4 brake flu-
id from a sealed container.
NOTE:
A low level may indicate leaks
or worn brake pads. See an authorized
Bombardier ATV dealer.
Front Brake Fluid Reservoir
Turn steering in the straight-ahead po-
sition to ensure reservoir is level.
Check the brake fluid level, the reser-
voir is full when the fluid reaches of the
top of window.
Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace if
damaged.
V04C05Y
V04K04Y
vmo2002_004a.book Page 61 Friday, August 3, 2001 10:27 AM
Содержание Quest 500 2002
Страница 1: ......
Страница 46: ...44 Label 8 Label 9 Label 10 Label 11 Label 12 V04M07Y V01M09Z V01M0BZ V04M08Y V04M0AL...
Страница 100: ......