63
Suspension
Front A-arm
Lubricate front A-arms with a grease
gun. Use synthetic grease (P/N 293
550 010).
1. Grease fittings
Swing Arm
Lubricate swing arm with a grease
gun. Use synthetic grease (P/N 293
550 010).
Occasionally, wheel nuts should be re-
moved to apply anti-seize lubricant on
studs to ease further removal. This is
particularly important when vehicle is
used in salt-water environment or in
mud. Remove one nut at a time, lubri-
cate then retorque.
Maintenance
Periodically check the engine and the
radiator area for cleanliness.
Valves Adjustment
See an authorized Bombardier ATV
dealer for valves adjustment.
Insufficient clearance will cause loss
of power and possibly damage the
valves. Excessive clearance will cause
noise.
Throttle Lever Adjustment
Slide rubber protector back to expose
throttle cable adjuster.
Loosen lock nut then turn the adjuster
to obtain correct throttle lever free play.
NOTE:
Measure throttle free play at
the tip of throttle lever.
Tighten lock nut and reinstall protector.
1. Throttle lever
2. Protector
3. Cable adjuster
4. Lock nut
A. 3 to 8 mm (1/8 to 5/16 in)
Gearshift Pedal Adjustment
Unfasten socket screw near selector
shaft end then remove gearshift pedal.
Install gearshift pedal at your conve-
nience then torque socket screw.
Clutch Adjustment
Loosen cable tension.
Adjust clutch release mechanism.
A. 68 to 75 mm (2-11/16 to 2-31/32 in)
V02J01Y
1
V02I04Y
2
3 4
1
A
V02D03Y
A
vmo2000_001b.fm Page 63 Friday, September 17, 1999 1:21 PM
Содержание DS 7404
