Bombard Commando C3, Руководство пользователя

Страница: 17 / 54

/ 8 6
INFLATION
Activate all valves into inflation position .
Fit the hose to the foot-pump.
To inflate your boat properly, the bottom side of
the foot-pump must rest on a flat ground
.
Pump evenly to inflate rapidly.
WARNING
DO NOT USE A COMPRESSOR OR A BOTTLE OF COMPRESSED AIR
You can us the electrical air pump
ACCESS (ask your Dealer).
TO INFLATE THE BUOYANCY TUBE
•
Insert the pump hose end piece (add the correct connecting tip for the semi-recessed valve)
•
Inflate (pressure = 240 mb, reefer to PRESSURE section) making sure that each compartment is
equal. When correctly inflated, the internal bulkheads (a) are not visible.
NEVER COMPLETELY
INFLATE A
COMPARTMENT TO FULL
PRESSURE IF OTHER
COMPARTMENTS ARE
TOTALLY DEFLATED
a
100 %
0 % 0 %
1
50 %
50 %
50 %
2
100 %
100 %
100 %
Inflation is over: fit the valve caps tight (clockwise).
NOTICE :
A slight air-leak before screwing the valve caps is normal.
ONLY THE VALVE CAPS CAN ENSURE FINAL AIR TIGHTNESS .