/ BM-GE-520 Owner’s Manual Ver.01-2009
Page 7
2. OPERATING RANGE AND CORRECT USAGE
BM-GE-520 grinding & polishing machine is exclusively design to grind and polish for horizontal
surface. It is not design for other purpose. The manufacture will not be liable for damage or
injury resulting from such kind of incorrect usage. In these case the user assumes all risks
3. BEFORE SWITCH ON THE MACHINE
3.1 Range of the application
* To remove undulated concrete surface
* To prepare the surface for coating
* To polish the surface
* To remove the coating defects
* To remove glue residue
* To remove the coating from wood floors
* To renovate wood floor for new coating
3.2 Handle adjust
Before switch on the BM-GE-520 machine the operator should adjust the handle. The user can
press the bar to adjust the handle on a comfortable operation level. Please see the figure:
3.3 Polish pad or grind wheel install
According to the request operator should install the polish pad or diamond grinding wheel on the
machine. Polishing pad just be easy stick on the adaptor. Diamond wheel should use bolt & nut
to tighten on the adaptor.
